200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelrtv 585 rtv 630
payment method
update timeFri, 22 Nov 2013 09:31:47 GMT
Color off-white/blue
Appearance Liquid
Application Mold Making Silicone Rubber
Curing agent 4% free of charged
Molding method Pouring , brushing
Package vacuumed packing
Shelf life 12 months
Sample Free
Certificates SGS, RoHS, MSDS, FDA, ISO, REACH, UL
Min Order200 kilogram
HY-638# silicone rubber is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 0.2%
Applications for 638 silicone rubber:
Poly technique, lightings, candles, and molds in multiple pieces for large products.
Standard Datasheet for 638 silicone rubber:
Model | Appearance | Viscosity (cs) | Hardness (Ao) | Tensile Strength (kgf/c) | Tear Strength (kgf/) | Elongation (%) | Mixing ratio(%) | Operating Time(H) | Curing Time(H) |
638 | White | 14000~16000 | 25~28 | ≥35 | ≥25 | ≥500 | 2~3 | 0.5 | 2~4 |
General Description for silicone rubber:
RTV-2 molding silicone rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes,and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. and fabrication of precision molds.
Operation Instruction for RTV-2 Molding Silicone Rubber:
The product is white or red flowing liquid with general hardness of 22--50A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
More details of RTV-2 Molding Silicone Rubber , pls feel free to contact Ms Taylor:
Tel:086-755-89212380
Mob:086-18938867522
Skype: taylordl828
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.