200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
model630# Liquid silicone rubber for PU fountain crafts
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 11:12:54 GMT
Color white/ off-white/ blue/ red/ yellow
Appearance Liquid
Application Mold Making Silicone Rubber
Catalyst 4% free of charged
Molding method Pouring , brushing
Package vacuumed packing
Shelf life 12 months
MOQ 100KGS
Sample Free
Certificates SGS, RoHS, MSDS, FDA, ISO, REACH, UL
Min Order200 kilogram
Liquid silicone rubber for PU fountain crafts mold are used for:
Mold duplication and delicate mold making for PU fountain, Gypsum statues, cement statues, poli crafts,resin crafts etc.
Operating steps of Liquid silicone rubber for PU fountain crafts mold
1. Deal with the original mould.
2. spary release agent evenly on the original mould
3. weigh the silicone rubber and curing agent correctly and mix them evenly
4.Deairring and air bubble eliminating handling
5.perfusion or brushing process
Datasheet of Liquid silicone rubber for PU fountain crafts mold
Model: 638# Liquid silicone rubber
Appearance: white
Viscosity (cs): 25000
Hardness (A): 20-22
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf /cm):≥25
Elongation break(%):≥500
Retractility (%):≤0.2
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
Model: 630# Liquid silicone rubber
Appearance: white
Viscosity (cs): 19000-25000
Hardness (A): 28-32
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf /cm):≥29
Elongation break(%):≥470
Retractility (%):≤0.2
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
Model: 728# Liquid silicone rubber
Appearance: white
Viscosity (cs): 18000
Hardness (A): 25
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf /cm):≥22
Elongation break(%):≥320
Retractility (%):≤0.2
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
Frequent asked questions of Liquid silicone rubber for PU fountain crafts mold:
Why is the appearance of the finished mold striate and unsmooth?
It is because the appearance of the product or the model itself is not perfect, and it has not been polished before the further operation. So when you make silicon molds, firstly you should polish the product, spray the mold spray evenly on the product. In this case, the problem can be avoided.
Features of Liquid silicone rubber for PU fountain crafts mold:
(1) Silicon rubber for pad printing with SGS and ROSH approval
(2) Curing agent arrange together as free charged
(3) In liquid form and in various colors
(4) With an exceptional fluidity and good operability.
(5)Temperature and deformation resistance as well as low shrinkage.
(6) High duplication times.
(7) Sample orders are available
(8) MOQ: 100KG
More details of Liquid silicone rubber for PU fountain crafts mold , pls feel free to contact Taylor:
Tel:086-755-89212380
Mob:086-18938867522
Skype: taylordl828
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.