200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-570 Silicone Rubber,540# ,570#,528# silicone ru
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 11:29:06 GMT
Color White
Curing Agent 5%for free charged
Use For Molding
Certificated RoHS, Reach, MSDS,SGS.ISO9001:2008
Type silicone rubber
Appearance Fluid
Classification Chemical Auxiliary Agent
Min Order200 kilogram
HY-570 Manual Mold Silicon rubber For large size products
Description of Manual Mold Silicon rubber For large size products :
HY-570 manual mold silicon rubber is flowing liquid with consistent quality in whatever color. It consists of two components, component A is silicone rubber, and component B is curing agent or catalyst. Firstly,prepare the master mold or the product to be duplicated, take certain amount of the silicone rubber, add 2-3% curing agent, and mix them evenly for use,a mold can be obtained in 2-3 hours. The mold with resistance to deformation and linear shrinkage and high temperature can be used repeatedly to provide fast duplication, and it with low shrinkage up to 2‰. The 570 manual molding silicon is mainly applicable to manual molds and small quantity of product duplication.
Applications of Manual Mold Silicon rubber For large size products :
The 570 silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
Standard Datasheet of Manual Mold Silicon rubber For large size products :
Model | Appearance | Viscosity (cps) | Hardness (Ao) | Tensile Strength (Mpa) | Tear Strength (KN/m) | Elongation (%) | Mixing ratio (%) | Pot life (H) | Demould time(H) |
570 | White | ≤45000 | 70±2 | ≥1.0 | ≥5 | ≥130 | 2~3 | 0.5 | 2~4 |
Operation Instruction for Manual Mold Silicone rubber
1. The manual mold silicon is applied to small products or products with fine patterns. The mold for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.
2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so that the products made will not deform.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.