Silicone for collapsible&perfusion mold making
- US $1.64
200 - 40,000 kilogram
- US $0.82
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelMOLDING SILICONE RUBBER
payment methodT/T, L/C, Westem Union
-
update timeTue, 05 Nov 2013 11:30:03 GMT
Paramtents
Certification SGS,MSDS,RoHS
HARDNESS 18-40A
Mixing Ratio 2%
Type silicone rubber
Appearance Fluid
Application Mold making materials
Certificated RoHS, Reach, MSDS,SGS.ISO9001:2008
EINECS No 39100000
Purity 100%
Curing Agent 5%for free charged
Packging & Delivery
Min Order200 kilogram
Briefing
2.light viscosity and good flowability
3.low shrinkage
4.favorable tension
Detailed
Silicone for collapsible&perfusion mold making
Operation Instruction :
The product is white or red flowing liquid with general hardness of 34—38A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns , it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed./span>
(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents