Molding Silicone For Fountain Production

Molding Silicone For Fountain Production  Applications:

poly technique,lightings,candles,and molds in multiple pieces for large products.

Molding Silicone For Fountain Production  Description:

Molding Silicone For Fountain Production is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength,high tear strength,high temperature resistance,high duplication times and repeated use,etc,it is suitable for small products or fine and precision products which is difficult to demould ,this molding silicone rubber(liquid silicone) is one of the products with the hgihest used level in the production of craftwork gifts and the shrinkage is up to 2%.

 Molding Silicone For Fountain Production General description:
RTV-2 molding silicone rubber and liquid silicone are general called two-component room temperature vulcanization liquid silcione with excellent fluidity and good operational performance.Add curing agent of 2%-3% at the room temperature,the molding silicone rubber(liquid silicone) is still operational within 30 minutes,and in 2-3 hours,an elastic silicone gel mold will be obtained with resistance to deformation,high-temperature,acid and alkali and expansion,the liquid silicone is mainly applicable to mold duplication of poly crafts,resin craftworks,lightings,candles,etc,and fabrication of precision molds,

Operation instruction for  Molding Silicone For Fountain Production (liquid silcone):

the prodcut is white or red flowing liquid with general hardness of 18-22 shore A after curing,if the customer wants to make large products and large size molds ,the mold should be made of silicone gel with high hardness,on the contrary,if the mold with fine and precision patterns,it should be made of liquid silicone with low hardness,the amount of the curing agent depends on the actual requirements of the customer,if molds requiring fast drying and demould ,more curing agent is needed,contrarily,if molds requiring slower drying and demould,less cruilng agent is needed.

(note:our company does not recommend you to add silicone oil,if a special soft liquid silicone mold or fine detailed and complex patterns products are required ,5%-10% silicone gel oil can be added to soften the mold for easy demould. )