the company of RTV-2 molding silicone rubber

the company of RTV-2 molding silicone rubber

1. non deformation
2. low shrinkage
3. high tear strength
4.favorable hardness...

Appilication of RTV 2 molding silicone rubber :

 Hongye  mold making RTV-2 silicon rubber is primarily intendedfor the reproduction of plate engrave,human replica,for the mold making of poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,soap mold,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.

RTV 2 molding silicone rubber glue features description

Hongye  mold making RTV-2 silicon rubber  is white or red flowing liquid with general hardness of 22-50A°after curing. Hongye mold making RTV-2 silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.

 The date sheet of RTV-2 molding silicone rubber :

RTV-2 mold silicon rubber for various crafts

RTV 2 molding silicone rubber operations

If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.

RTV-2 mold silicon rubber for various molds casting

(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)

Frequently asked questions of RTV 2 molding silicone rubber

Why does the silicone rubber mold have few molding times?

 The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products. 

What should we do when the air bubbles appeared in the process of mold making ? 

To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair . If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre- crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.

Any more information on RTV 2 molding silicone rubber glue, please fell free to contact with Mr Allen

Tel: 0086-755-89212365

Fax: 0086-755-89948030

Mobile:0086-18938861889

RTV 2 molding silicone rubber