Silicone For Mold Making

Silicone Kit For Mold Making  application:

Silicone Kit For Mold Making are suitable for mold masters for molding with polyester resin, epoxy resin, urethane foam, wax, plaster, and low-melt-point metal alloys. These RTV rubber compounds allow accurate reproduction of the shape of the original. They are easy to use and are thus used widely in industrial applications, as well as by hobbyists looking to create the perfect replica.

Silicone Kit For Mold Making description

A. Workability

The base compound and curing agent are mixed and then poured into the mold to create a silicone rubber mold quickly. Workable time and cure time can be adjusted. 

B. Mold-releasability

The cured rubber releases easily from the mold, so mold-release agents (soapy water, wax, etc.) are unnecessary.

C.Dimensional stability

These rubbers offer good dimensional stability, with little shrinkage.

D. Flowability

They have excellent flowability, so the original form is reproduced accurately. This includes even intricate shapes and details such as fingerprints and wood grain.

E.Heat and chemical resistance

These rubbers have outstanding resistance to heat and chemicals.

F.Deep-section curability

Moldmaking RTV silicone rubber compound cures uniformly throughout the mold, regardless of thickness

G.Non-exothermic

No heat is generated during curing, meaning no adverse effects to the original.

3.Frequently asked questions of Silicone Kit For Mold Making

Why is the silicon mold oily?

The molding silicone rubber itself doesn’t contain any oil, so it won’t be oily. If the mold is oily, it may be because you add the compound silicone oil( the compound of silicon oil and white oil).

For getting further information about RTV-2 silicone rubber, PLS contact with

Ms Moe

Email: hyt(at)szrl(dot)net

Skype: moe.chai

Tel: 86-755-89948019

Mob: 86-18938867514

Web: ..........net