200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelmould making silicone rubber RTV630
payment methodT/T, L/C, Westem Union
update timeTue, 05 Nov 2013 13:29:27 GMT
Color White
Mix ratio 100:4
Hardness shore A 30
Pot life 30-40min
Curing time 4-5h
Duplication times 800-1000times
Operate way by pouring
Original place Shenzhen,China
Certification SGS,Rosh
Shelf life 12months
Min Order200 kilogram
mould making silicone rubber
mould making silicone rubber Applications :
Features of mould making silicone rubber :
1 .Two part of Silicon rubber for artificial stone products: liquid white silicone and curing agent.
2. Silicon rubber for artificial stone products Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours.
3 . Silicon rubber for artificial stone products has Good fluidity and excellent operation.
4 . Silicon rubber for artificial stone products has Good resistance to weather, temperature, aging, acid..
5 . Silicon rubber for artificial stone products has Excellent tear strength, comfortable duplication times.
mould making silicone rubber operations:
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demold.)
Frequently asked questions of mould making silicone rubber :
Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.
TDS of mould making silicone rubber :
Model | 625# |
Appearance | white |
Mixing proportion of curing agent (%) | 4% |
Operating time (mins 25 0C ) | 30-45 |
Curing time(hours 25 0C) | 6-8 |
Hardness (A°) | 25 |
Density ( g/cm 3) | 1.08 |
Viscosity (mPas -25 0C) | 20000-23000 |
Tensile-strength(kgf /cm2) | ≥43 |
Tear-strength (kgf /cm) | ≥31 |
Elongation-break(%) | ≥ 440 |
For more information about mould making silicone rubber , please feel free to contact with
Ms.Emily
Tel:+86075589212381
Mobil:+8618938867614
Email:hyxa(at)szrl(dot)com
MSN:wanghongxiang1990(at)hotmail(dot)com
Skype:wanghongxiang1990
Web site:http://www(dot)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.