RTV-2 Addition cure silicone rubber for garden statue

FOB Price

US $10.35
1 - 200 piece

group nameAddition cure silicone rubber
Min Order1 piece
brand nameHong Ye silicone rubber
modelE630
payment methodL/C, T/T, Western Union
update timeWed, 02 Jul 2014 14:14:54 GMT

contact supplier

Paramtents

Application addition cure silicone rubber for garden statue
Appearance liquid silicone rubber
Color Translucent
HS code 39100000
Ship by sea

Packging & Delivery

Min Order1 piece

Briefing

1. resistance to deformation
2. high reproduction times
3. good tensile strength
4. exceptional fluidity

Detailed

Application of RTV-2 Addition cure silicone rubber for garden statue:

RTV-2 Addition cure silicone rubber for garden statue is suitable for the molding for plaster decoration duplication,gypsum sculpture reproduction,duplicating resin product with fine details,PU resin reproduction,wax molding,stone duplication ,epoxy moulds,pacrylic moulding,reproducing polyester craft.some of the materials you can cast into a silicone mold are: Urethane Plastic,Urethane Rubber,Epoxy,Polyester,Fiberglass Resign,Plaster,Soap,Wax,Low melt metals (up to 400 degrees Max),HydroCal White,UltraCal 30,Rigid Foam,concrete statue mold.

Feature of RTV-2 Addition cure silicone rubber for garden statue:

RTV-2 Addition cure silicone rubber for garden statue is generally named two-components silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability. The

mixing ratio is 1:1,mainly be suitable for making molds application.

Picture of RTV-2 Addition cure silicone rubber for garden statue:

RTV-2 Addition cure silicone rubber for garden statue,silicone rubber with competitive price

Datasheet of RTV-2 Addition cure silicone rubber for garden statue:

Product	E-630
Appearance	Translucent
Hardness(shore A)	30±2
Mix ratio(A:B)	1:1
Viscocity(mPa.s)	12000±2000
Tensile strength (kgf/cm²)	50±5
Tear-strength (kN/m)	18±2
Elongation(%)	450±50
Pot life/working time (mins)	30-40
Curing time/setting time (hrs)	3-4hrs(25°C) 110-20mins(60°C)

Operation of RTV-2 Addition cure silicone rubber for garden statue:

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Warm tips of RTV-2 Addition cure silicone rubber for garden statue:

1 Mixing ratio should be according to the intruction

2 Mixing ratio must be correct weight by eletronic weight

Certification of RTV-2 Addition cure silicone rubber for garden statue:

ISO9001: HK05/01358

SGS:GZ0606100461/CHEM

RoHS:BTRS091718751

Patent:ZL200520001597.8