200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE630
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:38:43 GMT
color translucent
shrinkage 0.1%
sample available
mix ratio 1:1
hardness 10-40 shore A
shelf 10 months
package 20kg and 200kg per drum
Certification ROHS.MSDS.SGS ISO9001:2000
operation pouring and brushing
MOQ 200kgs
Min Order200 kilogram
liquid silicone make mold for producing artficial stone from GRC
E630 Addition Molding Silicone
Description
E630 addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making FDA molds application.
Applications,
E630 addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, prototyping, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of E630 molding silicone
Model | E630 |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 40 |
Curing time (Mins 25°C) | 3-4h |
Hardness (A°) | 30±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | >15 |
Elongation-break(%) | 500 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of E630 molding silicone:
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
silicone rubber package details
silicone rubber certifications:
SGS
ROSHS
FDA
ISO900
We can provide good solution for you , if you have question about how to make silicone mold , or how to use the silicone mold ,and any problem about the silicone mold , pls kindly feel free to let us know , we will be happy to serve you.
Any questions of liquid silicone make mold for producing artficial stone from GRC, please feel free to contact Kaimi:
MOBILE:0086-18938867528
E-MAIL: hyju(at)szrl(dot)net
skype:hyjiangying
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.