200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
model625#,630#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:54:37 GMT
Sample free
curing agent 3%-5%
Certification SGS,MSDS,RoHS
Material 100% silicone
Appearance Fluid silicone rubber
Appliacation silicone rubber for resin products
Port shenzhen
HS code 39100000
Payment Terms L/C,T/T
Min Order200 kilogram
Appilication of silicone rubber for resin products :
silicone rubber for resin products is applicable for mold making of poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts in big or small size with simple or complex pattern
Specification of silicone rubber for resin products:
1, silicone rubber for resin products has excellent low temperature resistant property, chemical stability and resistance of corrosion of acid and alkaline, and was widely used in manufactory of handcraft, bathroom appliance and so on.
2, According to the characteristic of poly resin, serious of special room temperature vulcanized silicone rubber are produced to satisfy the various demands of customers. Our silicone rubber for mold makingwhich have good operability, high tear strength, chemical resistance, low deformation, are mainly used in reproduction of decoration and handcrafts from poly resin.
Picture show of silicone rubber for resin products:
Datasheet of silicone rubber for resin products :
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( A0 ) | Tensile-strength (Mpa) | Tear-strength (KN/m) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) | Application |
625 | White | 100 : 5 | 30-60 | 6-8 | 25±2 | 3.5±0.2 | 20±2 | 19000±3000 | ≤0.3% | 400% | Making plaster & candle mold making |
630 | White | 100 : 5 | 30-60 | 6-8 | 30±2 | 4.0±0.2 | 23±2 | 24000±3000 | ≤0.3% | 395% |
Using Guidance of silicone rubber for resin products:
(1) Take out a certain amount of liquid silicone base (part A)from the container;
(2) Take out a certain amount of liquid silicone base (part B) from the container and mix with part A.
(3) The two components of silicone rubber must be mixed homogeneously, otherwise, it will be partly cured and solidified;
(4) Deaerate in a vacuum cupboard to achieve bubble free vulcanization;
(5) Pouring the deaerated mixture over the highest point of the model to form castingmould;
(6) Demolding after the liquid silicone solidified thoroughly.
(7) The mixed liquid silicone rubber will solidified in 3-4 hours under room temperature.
Frequently asked questions of silicone rubber for resin products:
How to reduce the shrinkage?
1) Control the addition of catalyst. Usually, more catalyst would be added if you want to cured fast, but still we can adjust the working time and the curing time as you require.
2) Do not remould so fast, and pls let the silicone mold cured completely, which would take about 24 hours, then remould.
3) When you produce the products, pls put the mold flatly, then pour the plaster or other materials into it smoothly. When you do not usually the mold, you should store it flatly, not fold it, and you also can pour the plaster into it and not remould the finished plaster products, leaving it in the mold to keep the mold in original shape.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
Package of silicone rubber for resin products:
Certification of silicone rubber for resin products:
Our factory:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.