100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameMolding silicone rubber for tire molds
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelE635
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 15:56:38 GMT
color white
HS code 39100000
sample available
normal packing 25kgs per drum
delivery within 3 days
usage for mold making
MOQ 200kgs
shelf life one year
application car tyre making
Min Order100 kilogram
price of liquid silicone to make tire molds Applications :
Silicone rubber for tyre molds is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
Characteristics of price of liquid silicone to make tire molds
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Technical Datesheets of price of liquid silicone to make tire molds :
Item No | Color | Hardness (A°) | Viscosity (CS) | Tensile-strength( kgf /cm2 ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Mixing Ratio of silicone and catalyst |
E635 | Translucent | 35±2 | 8000±2000 | ≥60 | ≥13 | ≥400 | 1:1 |
E642 | Translucent | 42±2 | 10000±2000 | ≥60 | ≥15 | ≥450 | 1:1 |
Silicone rubber for price of liquid silicone to make tire molds :
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
our factory
Any questions of price of liquid silicone to make tire molds , please feel free to contact Maggie:
TEL: 086-755-89212380
FAX: 086-755-89948030
MOBILE:086-18938867501
Website: www(dot)szrl(dot)net
E-MAIL: hysd(at)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.