200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY625
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:00:24 GMT
Color Adjustable
Application Mold making silicone rubber
Shelf life 12 months
Appearance Liquid
Purity 100%
Curing agent / Catalyst 4% for free of charged
Molding method Pouring / brushing
Package Vacuum packing
Payment T/T 100% in advance, L/C, Western union
Min Order200 kilogram
platinum silicone for architectural stone mold
Applications:
HY- E625# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing,shoe insoles making, seal for electronic components and solar circuit board, trademark decoration. etc.
Description:
HY-E625# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1, mainly be suitable for making molds application.
E625 Addition molding silicone
Technique Data:
Model | HY-E625# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 50 |
Curing time (Mins 25°C) | 120 - 240 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 25±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 50± 5 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 500 ± 50 |
Retractility(%) | ≤0.1 |
Addition silicone rubber
OPERRATING INSTRUCTION:
1. Clean your products and brush a layer of release agent (detergent or soap water) on the surface of your product.
Note: The model should not have been used to make molds for tin cured silicone rubber before. Otherwise, the addition silicone will not get cured. (Use a new model to test it)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Mixing part A and part B with 1:1 mixing ratio and stir evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
4. Pour the mixture into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Addition silicone rubber
SHELF LIFE:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE:
Packed in clean 20kg/pail, 200kg/pail.
Any further information required,pls feel free to contact Cindy
Tel :86-1893886 7554
Emial:hysg(at)szrl.net
Skype:cindyyeah5
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.