200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY625
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 16:02:08 GMT
Color Adjustable
Application Mold making silicone rubber
Shelf life 12 months
Appearance Liquid
Purity 100%
Curing agent / Catalyst 4% for free of charged
Molding method Pouring / brushing
Package Vacuum packing
Payment T/T 100% in advance, L/C, Western union
Min Order200 kilogram
architectural stone mold making liquid silicone
HY- E625# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing,shoe insoles making, seal for electronic components and solar circuit board, trademark decoration. etc.
architectural cast stone molding silicone rubber
two-component
condensation-cure
high tear strength
grab fine details
General decription of architectural stone mold making liquid silicone
Architectural cast stone molding silicone rubber is generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2% curing agent, they can still be operated within 30 minutes, but will be formed after 4-6 hours. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle mold,etc.
Features of architectural stone mold making liquid silicone
1-architectural cast stone molding silicone rubber has an exceptional fluidity and good operability.
2-architectural cast stone molding silicone rubber has good Temperature and deformation resistance as well as low shrinkage.
3-architectural cast stone molding silicone rubber has High duplication times.
Typical properties of architectural stone mold making liquid silicone
E625 Addition molding silicone
Technique Data:
Model | HY-E625# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 50 |
Curing time (Mins 25°C) | 120 - 240 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 25±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 50± 5 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 500 ± 50 |
Retractility(%) | ≤0.1 |
Any further information required,pls feel free to contact Cindy
Tel :86-1893886 7554
Emial:hysg(at)szrl.net
Skype:cindyyeah5
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.