Addition silicone rubber for stone molding
- US $10.98
200 - 40,000 kilogram
- US $8.50
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelEHY642#
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 16:38:17 GMT
Paramtents
Color Transparent
Certificated RoHS, SGS, MSDS ,ISO9001:2000
shape liquid
shelf life 12 months
packing pakcing vacuum
application for mold making
delivery within 3 days after payment
payment terms T/T, L/C
MOQ 200 kg
transportaion by sea, by air
Packging & Delivery
Min Order200 kilogram
Briefing
2 Non Sticky
3 Lowest Shrinkage
4 Easy operation
5 Sample in free charge
Detailed
Description of Addition silicone rubber for stone molding
EHY642# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making FDA molds application.
Applications Addition silicone rubber for stone molding
EHY642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of HY-E642# molding silicone
Model | EHY642# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 50 |
Curing time (Mins 25°C) | 120 - 240 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 42±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 350 ± 50 |
Retractility(%) | ≤0.1 |
PERRATING INSTRUCTION of EHY642# molding silicone:
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail, 200kg/pail.
More information about the addition silicone rubber , please contact with Miss Caroline at any time:
TEL: +86-755-89948019
Mobile: +86-18938867567
Skype: cathy19900719
Email: hysf(at)szrl(dot)net
Website : www(dot)szrl(dot)net
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents