Translucent RTV Silicone Rubber for Prototyping
- US $15.96
200 - 40,000 kilogram
- US $8.91
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E642
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 16:59:13 GMT
Paramtents
color white molding silicone rubber
certifications RoHS.MSDS.SGS ISO9001:2000
operation way pouring way
hardness 40 shore A
shrinkage low shrinkage
visicosity low visicosity
deformation no deformation
elasticity good elasticity
duplication times high duplication times
Packging & Delivery
Min Order200 kilogram
Briefing
Low shrinkage silicone, less than 0.1%
large hardness, thus no deformation
Detailed
Description Translucent RTV Silicone Rubber for Prototyping:
RTV mold making addition silicone are generally named as two-part addition silicone rubber that vulcanises at room temperature.Part A is a flowable liquid, part B is the curing agent(platinum catalyst). It features an exceptional fluidity ,good operability,excellent physical properties and very low shrinkage. The mixing ratio between Part A and Part B can be 10:1 or 1:1.
Main applications of Translucent RTV Silicone Rubber for Prototyping :
- Rapid prototyping (urethane casting/silicone tooling/vacuum casting)
- GRC and Concrete moulding
- PU resin casting
- General Mouldmaking
- Superior manual mold design
E-series Translucent RTV-2 Addition silicone rubber standard datasheet (25°C)
(The mixing ratio of part A and part B can be adjusted to 1:1or 10:1)
Product | E-615 | E-620 | E-625 | E-630 | E-642 |
Appearance | Translucent | Translucent | Translucent | Translucent | Translucent |
Hardness(shore A) | 15±2 | 20±2 | 25±2 | 30±2 | 40±2 |
Mix ratio(A:B) | 1:1 | 1:1 | 1:1 | 1:1 | 10:1 |
Viscocity Part A(mPa.s) | 9000±2000 | 11000±2000 | 12000±2000 | 12500±2000 | 15000±2000 |
Viscocity Part B(mPa.s) | 1900±500 | 1900±500 | 1800±500 | 2400±500 | 100±50 |
Tensile strength (MPa) | 6.2 | 6.5 | 6.7 | 7.2 | 7.6 |
Tear-strength (kN/m) | 25 | 26 | 23 | 24 | 22 |
Elongation(%) | 569 | 581 | 480 | 440 | 450 |
Density | 1.05 | 1.05 | 1.07 | 1.13 | 1.14 |
Pot life/working time (mins) | 30-40 | 30-40 | 30-40 | 30-40 | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 120-30mins(60°C) | 3-4hrs(25°C) 120-30mins(60°C) | 3-4hrs(25°C) 120-30mins(60°C) | 3-4hrs(25°C) 20-30mins(60°C) | 6-8hrs(25°C) 30-50mins(60°C) |
Shrinkage rate (%) | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
Notice:
All above addition silicone is forbidden to mix with organic compounds of condensation cure silicone rubber,otherwise, the silicone rubber will not cure, and also should not mix with organic compounds containing S, P, N as well as metallic salt of organic acids. It also will cause this product cure uncompletely or not cure.
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents