Addition potting silicone rubber HY-9060#

Addition thermal conducted silicone HY- 9060
 

Typical Application of Addition thermal conducted silicone HY- 9060

9060 is suitable for bonded seal of electronic components, power module and control module, LED invertor potting, etc which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

Product Feature of Addition thermal conducted silicone HY- 9060

It can be applied to the sealing and pouring of various electronic components, and then forming insulation system with no corrosion and negligible shrinkage.

TECHNICAL GUIDELINES of Addition thermal conducted silicone HY- 9060

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 1:1

3, Deaeration the mixture under 0.08 MPa for 3 minutes.

4, The temperature influences the curing time of 9060. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Warm Tips:
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.

l         Condensation silicone which not completely cured or organic tin compounds

l         Sulphur, sulfide and sulfur rubber materials.

l         Amine compounds as well as contains the amine materials.

l         Pewters solder flux.

2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.

3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.

4. When it gets stratified after a period of storage, Please mix 9060 evenly before using, it does not affect the performance.
   
PACKAGE
20Kg/pail (Part A10Kg + Part B10Kg)

SHELF LIFE AND TRANSPORTATION

1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.

2. This kind of product is non-dangerous product, it can be transported as general chemicals.

3. Products exceed the storage life should be confirmed normal before using

Any more information please feel free to contact Apple:

TEL: 086-755-89948013

FAX: 086-755-89948030

MOBILE:086-15889446131

E-MAIL: eileen(at)szrl(dot)net