Addition silicone for electronia potting

Addition silicone for electronia potting  Applications:

 It is applicable to sealing,bonding,coating for electronic parts.

HY-9301  is two-component addition cure silicone rubber which can be divided into a transparent type and a flame resistant type. The product, which can be vulcanized under room temperature or moderate temperature with low viscosity, easy mixing and pouring, is applicable to bulk pouring with excellent electrical performance. 

Addition silicone for electronia potting  Technical Parameters

Addition silicone for electronia potting Features:

The product has low shrinkage and non-corrosive; the silicone rubber can be used for a long period at the temperature of -60°C~200°C with the characteristics of moisture-proof and waterproof, radiation-proof as well as weatherable and anti-ageing.

Note:  Vulcanizing under the room temperature or heat curing according to different requirements.

Addition silicone for electronia potting  TECHNICAL GUIDELINES

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Mixing Ratio: part A: part B = 1:1

3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.

4, Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100°C, the silicone will cure in 15 minutes; while in 25°C room temperature, the silicone will cure around 8 hours.

Notes:
1.The following material may hinder the curing of HY 9055, So pls use after the test. When necessary, pls clean the application areas.

l         Organotin compound or Condensation silicone with organotin

l         Sulphur, sulfide and sulfur rubber materials.

l         Amine compounds as well as contains the amine materials.

l         Pewters solder flux

2. HY 9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.

3. HY 9055 belongs to non-dangerous goods, but keep away from mouth and eyes.

4. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
   

PACKAGE
20Kg/pail as a set (Part A 10Kg + Part B 10Kg)

Addition silicone for electronia potting  SHELF LIFE AND TRANSPORTATION

1. Twelve(12) months when stored at 24C in tightly closed original packages.

2. This kind of product is non-dangerous product, which could be transported as general chemicals.

3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Addition silicone for electronia potting package details

Addition silicone for electronia potting certifications:

For more information, please feel free to call  or send E-mail toBrook :

Mobile:    0086-18938867579

Email:       hyjw(at)szrl(dot)net

Skype:     brook.zhou02

TEL:          0086-755-89948294

.