100% platinum silicone for casting

  platinum silicone for casting :

Good characteristics of easy-operation

Ligh viscosity and good flowability

Low shrinkage

 Favorable tension

 No deformation

Favorable hardness

High temperature resistance, acid and alkali-resistance and ageing resistance

Operations of silicone for mold making:

Step One of platinum silicone for casting: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Notes: silicone for mold making is a kind of flowing liquid and it contains two parts. Part A is a kind of white flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What is more, the finished moulds will meet a short life. All of these will cause a waste of silicon rubber.

Step Two of platinum silicone for casting; vacuum pumping

Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available

Step Three of platinum silicone for casting: Perfusion Molding

The perfusion molding is an easy way to make molds, it is  Slowly and evenly perfuse the mixed silicon rubber into the square frame. After the cross linking reaction.

Any questions of 100% platinum silicone for casting, please feel free to contact Kaimi:

MOBILE:086-18938867528

E-MAIL: hyju(at)szrl(dot)net

Skype:hyjiangying