Addition Silicon for Mold Making (Casting Concrete Fireplace)

1. Addition Silicon for Mold Making Description

Addition  silicon for mold making is generally named two-components silicon rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making FDA molds application.

2. Addition Silicon for Mold Making Applications

Addition  silicon for mold making could be mainly used for making concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

 
3. Addition silicon for mold making operations

1. deal with original moulds

2. brush on release agent

3. correct weigh accoring to mixng ratio

4. stir the two component evenly

5. vacuum-pumping

6. pouring

(Note: Our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold. ) 

4. Addition Silicon for Mold Making Storage of  Addition  silicon for mold making

 Store the original object in the mould by placing the two in a cool, dry location. This will help the mould to retain the original objects shape and help to prevent distortion.

Health and Safety - Material Safety Data Sheets available on request.
Packages – 25kg/pail,200kg/pail