200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE615,E620,E630,E635,E642 silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:36:13 GMT
Color White
silicone rubber:curing agent 3%-5%
Certification SGS,MSDS,RoHS
Material 100% silicone
Appearance Fluid
Appliacation molding silicone rubber
Min Order200 kilogram
Addition cure mold silicone rubber
Introduction of Addition cure mold silicone rubber :
1.light viscosity, pourable effort
2.Platinum curing
3.good tension and tear strength
4.high reproduction times
Application of Addition cure mold silicone rubber :
Addition cure mold silicone rubber is mainly applied for making various molds:
Addition cure mold silicone rubber can be used to make molds for food products, such as cake, chocalate etc.
Addition cure mold silicone rubber can be used to reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.
Addition cure mold silicone rubber can be used to reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.
Addition cure mold silicone rubber can also be used to reproduce soaps, candle & lighting.
Addition cure mold silicone rubber is widely used in rapid prototyping industry, typically used for making 20 to 40 pieces of functional prototypes out of broad range of polyurethanes and other polymers.silicone tooling is the fastest, most accurate, and least expensive way to create duplicatesof a prototype part .Merchandise made in our addition silicone moulds have a high quality analogous to the final product, which makes them particularly advisable for fit and performance testing and advertising purposes.
Technique Data of HY-E625# Addition cure mold silicone rubber
Model | HY-E625# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 40 |
Curing time (Mins 25°C) | 120 - 240 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 30±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 24000 ± 2000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 8000± 2000 |
Tensile-strength( kgf /cm2 ) | 65 ± 5 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 350 ± 20 |
Shrinkage(%) | ≤0.1 |
OPERRATING INSTRUCTION of Addition cure mold silicone rubber :
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.
Further information on Addition cure mold silicone rubber is available. Please feel free to contact Aaron
SHENZHEN HONG YE JIE TECHNOLOGY CO., LTD
Tel: 0086-0755-89948019
Mobile: 0086-13622300503
Fax: 0086-755-89948030
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.