200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E642 silicone rubber
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:46:07 GMT
certificate ROHS,SGS,ISO9001:2000
Colour translucent
HS code 39100000
MOQ 200kgs
features liquid
sticker available
type condensation addition
Min Order200 kilogram
RTV gypsum cornice mould making silicon
gypsum cornice mould making silicon Description
HY- E642# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
gypsum cornice mould making silicon Applications,
HY- E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
gypsum cornice mould making silicon Technique Data
Model | HY-E642# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 40 |
Curing time (Mins 25°C) | 120 - 240 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 42±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 350 ± 20 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of HY-E642# molding silicone:
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.
gypsum cornice mould making silicon package details
gypsum cornice mould making silicon certifications:
For more information, please feel free to call or send E-mail toBrook :
Mobile: 0086-18938867579
Email: hyjw(at)szrl(dot)net
Skype: brook.zhou02
TEL: 0086-755-89948294
.
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.