Addition cure Silicon Rubber mixing in 1:1
- US $12.00
200 - 40,000 kilogram
- US $9.50
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E series silicone rubber
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 17:46:43 GMT
Paramtents
state liqiuid
color of silicone part A white
color of catalyst red ,blue , clear
catalyst FOC
sample available
mixing 100:4
operation way pouring
another operation way brushing with additive
feature high tensile strength
feature 1 high tear strength
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Main features of Addition cure Silicon Rubber
Addition cure Silicon Rubber had the advantage of low viscosity, good operability, exceptional fluidity , high temperature resistance , excellent tensile and tear strength, as well as good elasticity.
Applications of Addition Silicon Rubber
Addition silicon rubber mainly use for making precision molds, silicon insoles, food grade moldschocolate, cake moulds life casting silicon products, fabric finishing, seal for electronic components and solar circuit board, trademark decoration, baby nipples, cable accessories, etc.
Typical datasheet of Addition Silicon Rubber :
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Viscosity (cps) | Hardness ( shore A ) | Tensile-strength (Mpa ) |
Tear-strength (KN/m) | Elongation (%)
| Shrinkage rate (%) |
E600 | Translucent | 1:1 | 30±10 | 4±1 | 5000±2000 | 0A | ≥10 | ≥2 | ≥300 | ≤0.1 |
E605 | Translucent | 1:1 | 30±10 | 4±1 | 6000±2000 | 5±2A | ≥20 | ≥8 | ≥500 | ≤0.1 |
E610 | Translucent | 1:1 | 30±10 | 4±1 | 6000±2000 | 10±2A | ≥30 | ≥15 | ≥500 | ≤0.1 |
E620 | Translucent | 1 : 1 | 30±10 | 4±1 | 7000±2000 | 20±2A | ≥40 | ≥15 | ≥300 | ≤0.1 |
E625 | Translucent | 1 : 1 | 30±10 | 4±1 | 8000±2000 | 25±2A | ≥55 | ≥10 | ≥300 | ≤0.1 |
E630 | Translucent | 1 : 1 | 30±10 | 4±1 | 8000±2000 | 30±2A | ≥60 | ≥10 | ≥300 | ≤0.1 |
E642 | Translucent | 1 : 1 | 30±10 | 4±1 | 8000±2000 | 30±2A | ≥60 | ≥10 | ≥300 | ≤0.1 |
Using Instructions of Addition Silicon Rubber
1. Applicable to the injection molding process
2. Mixing component A with B evenly according its mix ratio, it is ready for use after degassing , it cures by heating up the temperature when pouring into the mold.
3. The curing time is subject to the temperature, short time will be required under high temperature, long time will be required while the product with large thickness.
Package and storage precautions of Addition Silicon Rubber
1. The material is packed in 20kg per drum.
2. It is non-dangerous goods, should be stored at a cool and dry place, keep from sun and rain.
3. The service life is 12 months, it can be used after reinspection when exceeding time limits.
4. It is forbidden to mix with organic compounds of condensation cure silicone rubber, otherwise, the silicone rubber will not cure or vulcanize. It also should keep from organic compounds containing S,P,N, and metal salt of organic acid which causing silicon not cure or unvulcanized.
Any other information needed , pls feel free to contact omiga
0086-755-89948294 and mobile 0086-18938867575
mail:hyjw(at)szrl(dot)net
Welcome to our website www dot szrl dot net
You need a product
Related Searches
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents