Platinum Cured RTV Silicone Rubber for Prototyping
- US $15.96
200 - 40,000 kilogram
- US $7.80
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-E642
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 17:48:35 GMT
Paramtents
color white molding silicone rubber
certifications RoHS.MSDS.SGS ISO9001:2000
operation way pouring way
hardness 40 shore A
shrinkage low shrinkage
visicosity low visicosity
deformation no deformation
elasticity good elasticity
duplication times high duplication times
Packging & Delivery
Min Order200 kilogram
Briefing
Low shrinkage silicone
no deformation
good elasticity
Rosh,SGS,ISO
Detailed
Description of Platinum Cured RTV Silicone Rubber:
Platinum Cured RTV Silicone Rubber generally named two-component silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1, mainly be suitable for making molds application.
Main applications of Platinum Cured RTV Silicone Rubber:
- Rapid prototyping (urethane casting/silicone tooling/vacuum casting)
- GRC and Concrete moulding
- PU resin casting
- General Mouldmaking
- Superior manual mold design
Platinum Cured RTV Silicone Rubber standard datasheet (25°C)
Model | Color | Mixing ratio (%) | Pot life (mins) | Demould time ( hrs) | Hardness ( shore A ) | Tensile-strength (kgf/cm2 ) | Tear-strength (KN/m) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
E630# | Translucent | 1 : 1 | 20-50 | 2-6 | 30±2 | ≥50 | ≥13 | 8000±3000 | ≤0.1% | ≥410% |
E642# | Translucent | 1 : 1 | 20-50 | 2-6 | 42±2 | ≥60 | ≥15 | 10000±5000 | ≤0.1% | ≥400% |
Operation instruction of HY-E Series molding silicone:
1.Pls clear the model and tool totally before operation to prevent cure inhibition.
2. Weigh the two part correctly by electronic weight in two separate container .
2. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .
3. And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Notice : As our E-series silicone is platinum cure silicone , which is very easy to cause cure inhibition , so pls do remember thoroughly clean the model and tool before operation .
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents