liquid additional cure silicone rubber for molding

                                     liquid additional cure silicone rubber for molding  

Introduction of liquid additional cure silicone rubber for molding

The product is a two-component,translucent, add liquid silicone rubberwith superior mechanicalproperties, particularly forbutton production of silicone rubber in high hardness and high strength

Specifications of liquid additional cure silicone rubber for molding

1.Odorless
2.High tensile strength
3.Apply to injection molding progress
4.RoHS certificated,FDA,LFGB certificated

Features of liquid additional cure silicone rubber for molding  

Fast curing; high transparency;superior mechanicalproperties; No curing by-products; Easy color; Safe non-toxic; Good ventilation;Heat resistance; Good weatherresistance.

Applications of liquid additional cure silicone rubber for molding  

Electronic key products of mobile phone; mask material; baby bottle,nipple

Appearanceof liquid additional cure silicone rubber for molding  

Part A :Translucent liquid

Part B :Translucent liquid
Viscosity(25°C, Rotational Viscometer )
 Part A :2000Pa.S

Part B :2500Pa.S

How to use  liquid additional cure silicone rubber for molding  

1.Mixed A with Baccording to mixing ratio of 1:1 through the static mixer,then injectingthe mixed rubber into the mold through the injection machine, the rubber mustbe full filled (hand-mixing isfeasible, poured into the mold for molding)

2.Recommendedmolding conditions: 140°C/40-60s (thickness 2mm).

3.Testand determine the specific conditions of molding according to the thickness orsize of product

4.Ifthe bonding between the special material and silicone rubber is needed(e.g. PET,PC, iron andsteel materials, etc.you can check the accessory products of the silicone adhesive about our company )

Storage of liquid additional cure silicone rubber for molding  

Store this product sealed incool, dry and ventilated conditions;

Storage temperature :during 0~37°C

Collect and store the productwith galvanized metal, polyethylene or polypropylene containers.

Shelf life of liquid additional cure silicone rubber for molding  

12 months under above conditions.It remain can be used after shelf life if the technical data is qualified.

Package of liquid additional cure silicone rubber for molding  

Packagethe part A and part B with plastic drum .and 20Lfor each part, the net weightis 20kg

More information about the liquid additional cure silicone rubber for molding  , please don't hesitate to contact with Miss Caroline at any time:

Tel: +86-755-89948019

Mobile: +86-18938867567

Skype: cathy19900719

Email: hysf(at)szrl(dot)net

Website : www(dot)szrl(dot)net