100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-620
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 17:56:41 GMT
color white/ off-white/ blue/ red
HS. Code 39100000
Purity 100%
Appearance Liquid
Application Mold Making Silicone Rubber
Sample Free
Catalyst 4% free of charged
MOQ 100KGS
Molding method Pouring , brushing
Certification SGS, RoHS, MSDS, FDA, REARCH, ISO9001:2000
Min Order100 kilogram
HY-E620 Silicone Rubber For Tyre Molding
Silicone Rubber For Tyre Molding Description
HY- E series addition molding silicone is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
Silicone Rubber For Tyre Molding Typical Applications
HY- E series addition molding silicone could be mainly used for making concrete
stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and
chocolate , candy and any other FDA food product mold making,prototyping etc.
HY-E620 Silicone Rubberis has been used for years to make tire pattern molds .
Silicone Rubber For Tyre Molding Characteristics
*low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Silicone Rubber For Tyre Molding Technical Parameters
Product | E-620 |
Appearance | Translucent |
Hardness(shore A) | 20±2 |
Mix ratio(A:B) | 1:1/10:1 |
Viscocity Part A(mPa.s) | 23000±2000 |
Viscocity Part B(mPa.s) | 3500±500 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)
HY-E Series molding silicone Operation instruction
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
More details of Silicon Rubber RTV for mould making Rubber , pls feel free to contact Ms Taylor:
Tel:086-755-89212380
Mob:086-18938867522
Skype: taylordl828
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.