200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelTB0330
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:14:09 GMT
Main Raw Material Polyurethane
Usage Appliance Paint,Paper Coating,Plastic Coating,Rubber Coating,textiles coating
Application Method Brush
State Liquid Coating
Model TB0330
Appearance Transparent
Hardness(shore A) 30±2
Mix ratio(A:B) 1:1
Viscosity(mPa.s) 60000~100000
60000~100000 4.6
Tear-strength(KN/m) 19±2
Elongation(%) 360
Pot life/working time(25°C) 12-24 hours
12-24 hours 10~20(mins)
Min Order200 kilogram
printing silicone ink
TB0330 is a 2-part liquid silicone with high transparency , great tear-strength and strong bonding force.
Specification:
-Low shrinkage(<0.1%)
-Good skid-proof effect and high adhesive strength
-Wearproof ,wash-resistant,high temperature resistant
-Non-toxic and odorless,food grade silicone
-High transparency and good tear-strength.
Application:
It is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric,polyester-mixed cotton cloth,nylon cloth,flax,woolen,insulating cloth,etc.
Datasheet:
Model | TB0330 |
Appearance | translucent |
Hardness(shore A) | 30±2 |
Mix ratio(A:B) | 1:1 |
Viscosity(mPa.s) | 60000~100000 |
Tensile strength(Mpa) | 4.6 |
Tear-strength(KN/m) | 19±2 |
Elongation(%) | 360 |
Pot life/working time(25°C) | 12-24 hours |
curing time(100-120°C) | 10~20(mins) |
Operation introduction:
1,Mix Part A and Part B as ratio 1:1, you may add additive such as pigment as ratio 1~2% into part A.
2,It can be cured by heating with 100~150 degree, the curing time will be 5~10 minutes.
More information , pls kindly feel free to contact Ms Sarah:
e-mail: hysc(at)szrl(dot)net
Tel: 86-755-89212365
Mobile:86-13620974715
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.