200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-638# Silicone Molding Rubber (Similar to Wacker
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 18:29:50 GMT
Color White/Blue/Red Silicon Rubber
sample free
Standard SGS. RoHS. MSDS. ISO9001
HS Code HS Code
STATUS liquid
MIX RATIO 1:1
shelflife 12month
hardner 4% for free
Min Order200 kilogram
1. 29KN/M tear strentgh
2. High elongaon 410%
3. Low shrinkage 0.3%
4. Liquid, easy to operate
Application of liquid Silicone Rubber for gypsum products Casting Mold
Liquid rtv-2 silicone for gypsum products molding is mainly applicable to gypsum products, plaster,resin, cements mold is good for casting Plasters, Cements and resin, toy craftworks, gifts and stationery, large statues, duplication of cultural relics mold making, etc.
Description of liquid rtv-2 silicone for gypsum products molding
liquid rtv-2 silicone for gypsum products molding is flowing liquid with consistant quality in whatever color. It consists of two components, wherein component A is silicone rubber, and component B is curing agent or vulcanizing agent. Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicone rubber, add 2-3% curing agent, and mix evenly for use. One mold pair can be solidified and formed in 2-3 hours. The formed mold can be used repeatedly without deformation and water shrinkage and with high temperature resistance, thereby providing fast duplication of the product with a product shrinkage 2. The 618 manual mold silicon is mainly applicable to manual molds and small number of product duplication.
Operation Instruction of liquid rtv-2 silicone for gypsum products molding
1. liquid rtv-2 silicone for gypsum products molding is applied to small products or products with fine patterns. The mold for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.
2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so that the products made will not deform.
Specification of liquid rtv-2 silicone for gypsum products molding
Item No | Appearance | Hardness (A°) | Viscosity (CS) | Tensile-strength ( kgf /cm2 ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Operating time (mins 25 0C ) | Curing time(hours 25 0C) | Mixing proportion of curing agent (%) | Application(most for resin,candle, gypsum and cement product to make moulds) |
630# |
white |
30±2
|
24000±3000 |
≥43 |
≥29 |
≥410 |
30-45 |
6-8 |
4% | Most suitable for medium and large sized product by brushing method |
625# |
White |
25±2 |
18000±2000 |
≥39 |
≥25 |
≥425 |
30-45 |
6-8 |
4% |
Any more information required of liquid rtv-2 silicone for gypsum proucts molding ,please feel free to contact Ms. Sarah MOBILE: 0086-13620974715
Skype: Sarah_szrl
Email: hysc at szrl dot net
WEB: www dot szrl dot net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.