Addition cure silicone rubber,Addition silicone,Food grade silicone
- US $11.55
200 - 40,000 kilogram
- US $9.88
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE625#
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 18:36:13 GMT
Paramtents
Sample Available
curing agent 1:1
Certification SGS,MSDS,RoHS,FDA
Material 100% silicone
Classification Chemical Auxiliary Agent
Chemical Auxiliary Agent Fluid
Appliacation Addition cure silicone rubber,Addition silicone,Food grade silicone
HS code 39100000
Port shenzhen
Packging & Delivery
Min Order200 kilogram
Briefing
1,exceptional fluidity
2,good operability
3,Nontoxic&Food grade
4,heat-ageing resistance
Detailed
Addition cure silicone rubber application:
Addition cure silicone rubber,Addition silicone,Food grade silicone could be mainly used for making sculpture, concrete stones molds, baluster molds,precision molds, chocolate molds, cake molds, PU molds, jewellery molds, artificial stone,for life casting, fabric finishing, shoe insoles making,seal for electronic components and solar circuit board, trademark decoration. etc. It is food grade.
Addition cure silicone rubber specification:
Addition cure silicone rubber,Addition silicone,Food grade siliconeare generally named as two-part addition silicone rubber that vulcanises at room temperature.Part A is a flowable liquid, part B is the curing agent(platinum catalyst). It features an exceptional fluidity ,good operability,excellent physical properties and very low shrinkage. The mixing ratio between Part A and Part B can be 10:1 or 1:1.
Addition cure silicone rubber feature:
1. Two-component silicone rubber with platinum catalyst
2. Simple mixing ratio with 1:1 dosage
3. With high transparency, tensile strength, and tear strength.
4. Nontoxic & reach to Food grade
5. With good heat stability and weather ability ( temperature resistant range of -60-250 C)
6. With heat-ageing resistance
Addition cure silicone rubber picutre show:
Addition cure silicone rubber datasheet:
Model | E625# |
Appearance | Translucent |
Mixing Ratio | 10:1 |
Operating time (Mins 25°C) | 30 - 45 |
Curing time (Hrs 25°C) | 4-8 |
Hardness (A°) | 25 |
Density ( g/cm 3 ) | 1.1 |
Tensile-strength( Psi ) | 550 |
Tear-strength (Pli ) | 80 |
Elongation-break(%) | 500±50 |
Addition cure silicone rubber operation way:
1.The cast pouring, for example:
Prepare a frame, fix the prototype for copy into the frame, (if the prototype’s material is glass or ceramic, the release agent is necessary to prevent sticking.
2. Take 1 part A and 1 part B,mix themevenly.
3.Vacuum defoaming in 1~3 min,inject the rubber into the type box, then vacuum defoaming again, curing 24 hours in nature room temperature, use it after demold.
4. Demold after 3 hours’ room temperature curing, and then use it after 24 hours’ keep mold under the same condition.
Addition cure silicone rubber shelf life:
Ten (10) months from date of shipment when stored at 24°C in original unopened packages.
Addition cure silicone rubber package:
Packed in clean 20kg/pail, 200kg/pail.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me email by scanning 2 Dimensional Bar Code below:
Certification of Addition cure silicone rubber:
Our factory and equirement:
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents