Addition silicone rubber for faux stone mold making
- US $12.36
200 - 40,000 kilogram
- US $9.69
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE642
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 18:55:44 GMT
Paramtents
Certification SGS,MSDS,RoHS
Hardness 18-40A
Mixing Ratio 1:1
Type liquid silicone
Appearance Fluid
Application Addition silicone rubber for faux stone mold making
EINECS No 39100000
Purity 100%
Port shenzhen
Sample free
Packging & Delivery
Min Order200 kilogram
Briefing
Low shrinkage
No deformation
High temperature resistance
Detailed
Addition silicone rubber for faux stone mold making applications:
Addition silicone rubber for culture stone mold making is mainly applied for making various molds:concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product,
poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.soaps, candle & lighting.
Addition silicone rubber for faux stone mold making feature:
1) low shrinkage
2) good operation
3) high tear and tensile strength
4) curing agent free
5) easy de-mold
6) high reproduction times
7) resistance to deformation and high-temperature, acid-alkali
Addition silicone rubber for faux stone mold making picture show:
Addition silicone rubber for faux stone mold making datasheet:
| Item No | Color | Hardness (A°) | Viscosity (CS) | Tensile-strength( kgf /cm2 ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Mixing Ratio of silicone and catalyst | Application(most for resin, gypsum and cement product to make moulds) |
| E635 | Translucent | 35±2 | 8000±2000 | ≥60 | ≥13 | ≥400 | 1:1 | Most suitable for medium sized product |
| E642 | Translucent | 42±2 | 10000±2000 | ≥60 | ≥15 | ≥450 | 1:1 | Most suitable for large sized product |
Addition silicone rubber for faux stone mold making operations:
Step One: Take 100g of part A and add 100g of part B and mix the silicon rubber and the curing agent evenly.
Step Two: vacuum pumping
Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.Step Three to use E642#: Brushing cast & Perfusion Molding operation.
Addition silicone rubber for faux stone mold making FAQ:
Why should the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicon rubber. Silicon oil is an additive which destroies the molecular weight of silicone rubber and reduce the tension and tear strength.
b. Adding too much catalyst(curing agent).Too much catalyst can make the silicone cure very fast and and reduce the mold life.
C. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs and the silicon rubber with a low hardness to makes molds for large sized products with simple designs.
(Notes: we should choose the silicon rubber specifically according to the requirements of our products to avoid this problem.)
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
Addition silicone rubber for faux stone mold making certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
Addition silicone rubber for faux stone mold making package:
Addition silicone rubber for faux stone mold making equirement:
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents