200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE-630
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:02:04 GMT
color As request
sample available
mix ratio 100:3
catalyst free
shelf life 12 month
HS code 3910 0000
MOQ 200kgs
application Addition cure silicone rubber for concrete balustrade
operation pouring or brushing
certificate RoHS, MSDS, SGS, ISO9001:2000
Min Order200 kilogram
Application of Addition cure silicone rubber for concrete balustrade:
Addition cure silicone rubber for concrete balustrade is suitable for the molding for plaster decoration duplication,gypsum sculpture reproduction,duplicating resin product with fine details,PU resin reproduction,wax molding,stone duplication ,epoxy moulds,pacrylic moulding,reproducing polyester craft.some of the materials you can cast into a silicone mold are: Urethane Plastic,Urethane Rubber,Epoxy,Polyester,Fiberglass Resign,Plaster,Soap,Wax,Low melt metals (up to 400 degrees Max),HydroCal White,UltraCal 30,Rigid Foam,concrete statue mold.
Advantage of Addition cure silicone rubber for concrete balustrade:
almost nil shrinkage
high chemical resistance to aggressive components of some types of resins
good tear strength (this feature ensures higher resistance to wearing and shearing)
high degree of precision in reproduction
high dimensional stability over time and non-deformability
high resistance to high temperatures and ageing (resit to -60-200°C)
Picture of Addition cure silicone rubber for concrete balustrade:
Datasheet of Addition cure silicone rubber for concrete balustrade:
Product | E-630 |
Appearance | Translucent |
Hardness(shore A) | 30±2 |
Mix ratio(A:B) | 1:1 |
Viscocity(mPa.s) | 12000±2000 |
Tensile strength (kgf/cm2) | 50±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Operation of Addition cure silicone rubber for concrete balustrade:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Certification of Addition cure silicone rubber for concrete balustrade:
Any further information required of silicone rubber for artificial stone mould making , pls feel free to contact Ms Kaimi
Mobile: 0086-18938867528
Tel: 0086-755-89212369
E-mail: hyju(at)szrl(dot)net
Website: www(dot)szrl(dot)net
skype:hyjiangying
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.