200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE-630
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:02:53 GMT
color whtite or blue
curing agent free
certificate MSDS ISO9001 RHOS
sample available
shelf life 12 month
MOQ 200 kgs
mix ratio 100:3
HS code 3910 0000
application RTV-2 Addition cure silicone rubber for garden statue
appearance liquid silicone rubber
Min Order200 kilogram
Application of RTV-2 Addition cure silicone rubber for garden statue:
RTV-2 Addition cure silicone rubber for garden statue is suitable for the molding for plaster decoration duplication,gypsum sculpture reproduction,duplicating resin product with fine details,PU resin reproduction,wax molding,stone duplication ,epoxy moulds,pacrylic moulding,reproducing polyester craft.some of the materials you can cast into a silicone mold are: Urethane Plastic,Urethane Rubber,Epoxy,Polyester,Fiberglass Resign,Plaster,Soap,Wax,Low melt metals (up to 400 degrees Max),HydroCal White,UltraCal 30,Rigid Foam,concrete statue mold.
Feature of RTV-2 Addition cure silicone rubber for garden statue:
RTV-2 Addition cure silicone rubber for garden statue is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability. The
mixing ratio is 1:1,mainly be suitable for making molds application.
Picture of RTV-2 Addition cure silicone rubber for garden statue:
Datasheet of RTV-2 Addition cure silicone rubber for garden statue:
Product | E-630 |
Appearance | Translucent |
Hardness(shore A) | 30±2 |
Mix ratio(A:B) | 1:1 |
Viscocity(mPa.s) | 12000±2000 |
Tensile strength (kgf/cm2) | 50±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Operation of RTV-2 Addition cure silicone rubber for garden statue:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
Warm tips of RTV-2 Addition cure silicone rubber for garden statue:
1 Mixing ratio should be according to the intruction
2 Mixing ratio must be correct weight by eletronic weight
Certification of RTV-2 Addition cure silicone rubber for garden statue:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Any questions of Certification of RTV-2 Addition cure silicone rubber for garden statue, please feel free to contact Kaimi:
FAX: 086-755-89948030
MOBILE:086-18938867528
Website: www(dot)szrl(dot)net
E-MAIL: hyju(at)szrl(dot)net
skype:hyjiangying
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.