200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE630
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:08:00 GMT
Shaping Mode Silicone Mould
Product Material Rubber
Product slicon rubber
appearance translucent
hardness 30
mix ratio 1;1 or 10;1
viscosity 12000+2000
tesile strength 5.2
tear strength 12 +2
elongation 470
density 1.13
pot life 20-40
shrinkage 0.1
Min Order200 kilogram
HY- E635# Addition Molding Silicone
1.Description of HY- E635# Addition Molding Silicone
HY-E635# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds and prototyping application.
Technique Data of HY-E635# Addition molding silicone
Model | HY-E635# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 28°C) | 30 |
Curing time (Hours 28°C) | 3-4 |
Hardness (A°) | 35±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 23000- 2700cps |
Viscosity (CS) (Part B) | 23000- 2700cps |
Viscosity (CS) (After mixed) | 6500 ± 200 |
Tensile-strength( kgf /cm2 ) | 100± 2 |
Tear-strength (kgf /cm2 ) | 14 ± 2 |
Elongation-break(%) | 380-420 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of HY-E635# Addition molding silicone:
1.Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE: Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.
Attention: Do not use the same container to hold addition cured silicone rubber and condensation one, and it is also forbidded to use the same rod to stir the condensation and addition cured silicone rubber)
packing of HY-E635# Addition molding silicone:
company of HY-E635# Addition molding silicone:
certification of HY-E635# Addition molding silicone:
Liquid Silicon Rubber Application of Liquid Silicon Rubber:
2 Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours.
Datasheet of Liquid Silicone Rubber
Shelf life for liquid silicone rubber
10~12months, when stored in a dry & cool place under the room temperature 25.
Package of liquid Silicone Rubber for sculpture molding
Certifications of liquid Silicone Rubber for plaster molding
Company profile:
We are manufacturer specializing in molding silicone rubber, mold duplicating rubber for resin craft makers, special silicon for manual molding, shoe mold rubber, pad printing silicone, encapsulants and potting compound,addition cure liquid silicone,baby nipple silicone rubber ,lifecasting,food grade silicone rubber, trademark silicone rubber, HTV silicone rubber, leadzinc alloy crafts silicone rubber, hot stamping silicone plate, hot stamping silicone roller, gross rubber, RTV-2 silicone rubber, silicone molds, silicone products,etc.
For more information about liquid silicone rubber, please feel free to contact with omiga Mobile:86-18938867575 TEL: 86-0755-89948294 FAX: 86-0755-89948030 E-mail:hyjw(at)szrl(dot)net Welcome to visit www (dot)szrl (dot)net anytime. |
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.