addtion cure silicon rubber/ resin rubber
- US $17.60
200 - 40,000 kilogram
- US $10.20
40,001 - 999,999 kilogram
group nameAddition cure silicone rubber
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE642
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 19:08:37 GMT
Paramtents
appearance translucent
hardness 15+2 shoreA
MIX RATIO 1;1 10;1
VISCOSITY 14000+2000
tensile strength 6.2
tear strength 12
elongation 320
density 1.14
pot life 20-40mins
shrinkage rate 0.1
Packging & Delivery
Min Order200 kilogram
Briefing
Low linear shrinkage,
Good operation,
High tear and tensile strength,
Easy demoulding
Detailed
addtion cure silicon rubber/ resin rubber
Description of addtion cure silicon rubber/ resin rubber
HY- E642# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
Applications of addtion cure silicon rubber/ resin rubber ,
HY- E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of addtion cure silicon rubber/ resin rubber
Model | HY-E642# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 30 - 40 |
Curing time (Mins 25°C) | 120 - 240 |
Curing time (Mins 60°C) | 20 - 30 |
Hardness (A°) | 42±2 |
Density ( g/cm 3 ) | 1.08 |
Viscosity (CS) (Part A) | 30000 ± 5000 |
Viscosity (CS) (Part B) | 5000 ± 500 |
Viscosity (CS) (After mixed) | 10000 ± 2000 |
Tensile-strength( kgf /cm2 ) | 100 ± 20 |
Tear-strength (kgf /cm2 ) | 15 ± 2 |
Elongation-break(%) | 350 ± 20 |
Retractility(%) | ≤0.1 |
OPERRATING INSTRUCTION of addtion cure silicon rubber/ resin rubber
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE of addtion cure silicon rubber/ resin rubber : Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.
company of addtion cure silicon rubber/ resin rubber
certification of addtion cure silicon rubber/ resin rubber
For more information about liquid silicone rubber, please feel free to contact with omiga
Mobile:86-18938867575
TEL: 86-0755-89948294
FAX: 86-0755-89948030
E-mail:hyjw(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime.
You need a product
Related Searches
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents