Molding rtv silicone for plaster statues

Molding rtv silicone for plaster statues 

Description of Molding rtv silicone for plaster statues

HY- E series addition molding silicone is generally named two-components silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability.

The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

Typical Applications of Molding rtv silicone for plaster statues

HY- E series addition molding silicone could be mainly used for making concrete

stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and

chocolate , candy and any other FDA food product mold making, prototyping etc.

Characteristics of Molding rtv silicone for plaster statues

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 /10:1)

*very good flow and easy for pouring operation

*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat

Technical Parameters of Molding rtv silicone for plaster statues

(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.) 

OPERRATING INSTRUCTION for Molding rtv silicone for plaster statues: 

1.Stir part A and part B with right mixing ratio evenly. (E630# is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).

2.Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4.Pour the mixture with correct mixing ratio into the model frame. 

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE of Molding rtv silicone for plaster statues:  

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE for Molding rtv silicone for plaster statues:

Packed in clean 25kg/pail,  200kg/pail.

Any more information abt Molding rtv silicone for plaster statues, pls feel free to contact Ms. Bella:

Mobile:0086-18938867572

Tel: 0086-755-892948006

Fax: 0086-755-89948030

Website: www (dot) szrl (dot) net

Email:hysi(at)szrl(dot)net

Skype: bellajiaqi