200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelCondensation Potting Compound HY-210#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:13:58 GMT
condition liuqid
Min Order200 kilogram
AaCondensation Electronic Potting Compound for LED Features & Applications
Condensation Electronic Potting Compound for LED HY-210# is in two parts with low viscosity.
Condensation Electronic Potting Compound for LED HY-210# can be cured completely at room temprature.
Condensation Electronic Potting Compound for LED HY-210# works on the surface of material as PC(Poly-carbonate), PP, ABS, PVC as to its superior bonding feature.
Condensation Electronic Potting Compound for LED HY-210# is also applicable for insulation, waterproof and bonding of electronics parts.
Condensation Electronic Potting Compound for LED HY-210# meets the requirements of European RoHs.
Condensation Electronic Potting Compound for LED HY-210# Typical Application
-Potting for Protection of general electronic module.
-Outdoor protection for LED screen.
Condensation Electronic Potting Compound for LED HY-210# Technical Parameters
Properties index | Part A | Part B | |
Before Curing | Appearence | Black / White / Transparent fluid | Colorless / yellowish fluid |
Viscosisty (cps) | 2500±500 | - | |
Features when operation | Mixing Ratio ( By weight) | 10:1 | |
Operating Time (25C /min) | 20~30 | ||
Curing time ( hr, basically cured) | 3 | ||
Curing time ( hr, perfectly cured) | 24 | ||
Hardness(shore A) | 15+/-3 | ||
After Curing | Thermal Conductivity[W( m·K)] | ≥0.2 | |
Dielectric Strength( kV/mm) | ≥25 | ||
Dielectric permittivity(1.2MHz) | 3.0~3.3 | ||
Volume resistivity(Ω·cm) | ≥1.0×1016 | ||
Fire Resistance | 94-V1 |
(Pls note all data of Condensation Electronic Potting Compound for LED HY-210# above is in 25C with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated).
Warm Tips
1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.
2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.
3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,
it does not affect the performance.
Package
22kg/set (Part A 20kg + Part B 2kg)
Shelf Life and Transportation
1. Twelve(12) months when stored at 25C in original unopened packages.
2. This is a non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
Technical Guidelines
1. Pls put part A and B in separate container and stir evenly before mixing the two
parts together.
2. Mixing Ratio part A:part B is10:1.
3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3 minutes.
4. HY-210# is cured at roon temperature, so pls put it under room temperature after
pouring. It comes to next process when basically cured, and it takes about 24 hours
for completely cured.
Kindly note: Temperature and Humidity with a tremendous influences for curing of HY-210#.
Further information, please feel free to contact Firleanna:
SKYPE:HY-Firleanna
T: 86-755-85224692
M:86-18938867520
F: 86-755-89948030
3w(dot)szrl(dot)net
3w(dot)sellsilicon(dot)com
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.