Silicone sealant

                                                                          9325 Silicone Sealant

Product Feature of silicone sealant:

Silicone sealant is a newly insulating materialsilicon of silicon compounds.
It cures with no heat, no corrosion and little shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.

Features of silicone sealant:

lRoom temperature vulcanize, and easy to operate;

lMaintain flexibility at a wide temperature range, and excellent insulation performance;

lWaterproofing, moisture-proof, mouldproof, dustproof, and fixed components;

lResistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.

Typical Application of silicone sealant:

9325  Silicone sealant is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc. 

Technical Parameters of silicone sealant:

(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.
The appearance can be adjusted by our technical department if required.)

TECHNICAL GUIDELINES of silicone sealant :

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 1:1

3, Deaeration the mixture under 0.08 MPa for 3 minutes.

4, The temperature influences the curing time of 9301. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Warm Tips of silicone sealant:

1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.

lCondensation silicone which not completely cured or organic tin compounds

lSulphur, sulfide and sulfur rubber materials.

lAmine compounds as well as contains the amine materials.

lPewters solder flux.

2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.

3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.

4. When it gets stratified after a period of storage, Please mix 9301 evenly before using, it does not affect the performance.
   
PACKAGE of silicone sealant:

20Kg/pail (Part A10Kg + Part B10Kg)

SHELF LIFE AND TRANSPORTATION Of silicone sealant

1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.

2. This kind of product is non-dangerous product, it can be transported as general chemicals.

3. Products exceed the storage life should be confirmed normal before using.

If you want to know more information about the silicone sealant , please don't hesitate to contact with miss Caroine  at any time :

Tel: +86-755-89948019

Mobile: +86-18938867567

Skype: cathy19900719

Email: hysf(at)szrl(dot)net

Website : www(dot)szrl(dot)net