200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
model9055/9060
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:37:19 GMT
color transparent/grey/black/white
HS Code 39100000
Sample available
Mixing Ratio 1:1/ 10:1
Hardness(Shore A) 60±5
Curing time (min,25°C) 480
Fire Resistance 94-V0
Packaging Details 25kg/drum and 200kg/drum
Delivery Time within 3 days after payment confirmed in our bank
Payment Terms L/C at sight, T/T, West Union
Min Order200 kilogram
potting sealing silicone for electronic components
HY-9060 Electronic Potting Compound
1. Product Feature of potting sealing silicone for electronic components
HY-9060# is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. The flame retardant UL94-V0 level can be achieved.
It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials. sealing and encapsulation of switch pack, circuit board encapsulation, etc.
2. Typical Application of potting sealing silicone for electronic components
HY-9060# is suitable for
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
It can be broadly used for LED screen, circuit encapsulation, Wind Power Generator, PCB substrate, etc.
3. Technical Parameters of potting sealing silicone for electronic components
Features | Part A | Part B | |
Before Curing | Appearence | Gray Fluid | White Fluid |
Viscosisty(25°Ccps) | 3000±500 | 3000±500 | |
Operation features | Mixing Ratio | 1:01 | |
Viscosisty(after mixing) (cps) | 2500~3500 | ||
Operating Time(25°C hr) | 120 | ||
Curing time (min,25°C) | 480 | ||
Curing time(80°C hr) | 20 | ||
After Curing | Hardness(Shore A) | 60±5 | |
Thermal conductivity [W(m·K)] | ≥0.8 | ||
Dielectric Strength(KV/mm) | ≥25 | ||
Permittivity(1.2MHz) | 3.0~3.3 | ||
Volume Resisivity(Ω·cm) | ≥1.0×1016 | ||
linear expansibility [m/(m·K)] | ≤2.2×10-4 | ||
Fire Resistance | 94-V0 |
(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using)
4. TECHNICAL GUIDELINES of RTV silicone for electronic potting compound
1. Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.
4, The temperature influences the curing time of HY-9060#. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. Suggested operation time and temperature. With temperature of 80~100°C, the silicone will cure in 15 minutes, while in 25°C room temperature, the silicone will cure around 8 hours.
5. Warm Tips of potting sealing silicone for electronic components :
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.
Condensation silicone which not completely cured or organic tin compounds
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix 9060 evenly before using, it does not affect the performance
Packaging Details:25kg/drum and 200kg/drum
Delivery Time:within 3 days after payment confirmed in our bank.
Payment Terms:L/C at sight, T/T, West Union
Supply Ability:8 Ton per Day
Storage and Shelf life: one year in cool dry place
If you have any questions with potting sealing silicone for electronic components , pls feel free to contact Ms Angel Yue
MSN: angelfly369(at)msn(dot)cn
Skype:angelfly369
Email:hysa(at)szrl(dot)net
Tel:0086-755-89948006
Mob: 086-18938867575
Trademanager:cn200039753
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.