^ Encapsulating Silicone for Led

  Encapsulating Silicone for Led 

Applications of Encapsulating Silicone for Led:

Encapsulating silicone is used for bonded seal of electronic components, power module and control module, LED invertor potting, etc which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

Features of  Encapsulating Silicone for Led:

Encapsulating silicone for Led can be applied to the sealing and pouring of various electronic components, and then forming insulation system with no corrosion and negligible shrinkage.

l Room temperature vulcanize, and easy to operate;

l Maintain flexibility at a wide temperature range, and excellent insulation performance;

l Waterproof, moisture-proof, mouldproof, dustproof, and stable components;

l Resistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.

(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.
The appearance can be adjusted by our technical department if required.)

Operating Instructions of  Encapsulating Silicone for Led:

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 10:1

3, Deaeration the mixture under 0.08 MPa for 3 minutes.

4, The temperature influences the curing time of 9301. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.

Warm Tips of Encapsulating Silicone for Led:

1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas.

l Condensation silicone which not completely cured or organic tin compounds.

l Sulphur, sulfide and sulfur rubber materials.

l Amine compounds as well as contains the amine materials.

l Pewters solder flux.

2. The potting compound silicone Should be sealed storage.The mixture should be used up at once, avoid causing waste.

3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.

4. When it gets stratified after a period of storage, Please mix 9301 evenly before using, it does not affect the performance.
   
Packages of Encapsulting Silicone for LED:

20Kg/pail  vacuum packing

Shelf Life and Transportation of Encpsulating Silicone for LED:

1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.

2. This kind of product is non-dangerous product, it can be transported as general chemicals.

3. Products exceed the storage life should be confirmed normal before using.

Any more information , please feel free to contact Ms omiga

Office No.: 086-0755-89948294

Fax No.: 086-0755-89948030  

Mob: 86-18938867575

Skype: omigago

Email: hyjw(at)szrl.net

Website:  ..........net