200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameelectronic potting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY 9055
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 19:56:20 GMT
Port shenzhen
Certification SGS,MSDS,RoHS
HARDNESS 55+/-5
Mixing Ratio 1:1
Type htv silicone rubber
Appearance Fluid
Certificated RoHS, Reach, MSDS,SGS.ISO9001:2008
EINECS No 39100000
Purity 100%
Sample free
Min Order200 kilogram
Electronic compound potting sillicone rubber for LED for screenApplication:
Electronic compound potting silicone rubber for LED screen is suitable for high powered electronics, DC/DC module and circuit board which requires heat dissipation and high temperature resistance.It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Electronic compound potting sillicone rubber for LED screenFeature:
Electronic compound potting sillicone rubber for LED screen with good elasticity is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
Electronic compound potting sillicone rubber for LED screen Picture show:
Electronic compound potting sillicone rubber for LED screenDatasheet:
Before Curing | Appearence | Black Fluid |
Density(25°C g/ml) | 0.98±0.02 | |
Viscosisty(25°Ccps) | Part A 2500±500;Part B:2500±500 | |
Mixing Ratio | A:B=1:1(By weight) | |
Operating Time(25°C min) | 120 | |
Curing time(25°C min) | 480 | |
Curing time(80°C min) | 20 | |
After Curing | Hardness(Shore A) | 50-60 |
Dielectric Strength(KV/mm) | 23 | |
Volume Resistance(Ω.Cm) | 1.0×10 15 | |
Permittivity(1.2MHz) | 3.0 | |
Temperature Resistence(°C) | -60~200 | |
Fire Resistance | UL94-V1 | |
| Arc Resistance | 250V |
Electronic compound potting sillicone rubber for LED screen technical guidelines:
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Mixing Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
4, Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100°C, the silicone will cure in 15 minutes; while in 25°C room temperature, the silicone will cure around 8 hours.
Electronic compound potting sillicone rubber for LED screen Notes:
1.The following material may hinder the curing of HY 9055, So pls use after the test. When necessary, pls clean the application areas.
2. HY 9055 should be sealed storage.The mixture should be used up disposably to avoid causing waste.
3. HY 9055 belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
Electronic compound potting sillicone rubber for LED screen Package:
20Kg/pail as a set (Part A 10Kg + Part B 10Kg)
Electronic compound potting sillicone rubber for LED screen Certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-18938867593
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
About us:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.