200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameLife casting silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE610#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 20:26:58 GMT
Appearance colour of skin
certifications RoHS.MSDS.SGS ISO9001:2000
Mixing proportion of curing agent (%) 1:1
Operating time (mins 25℃ ) 30
Curing time(hours 25 ℃) 4~5
Hardness (A°) 10±2
Density ( g/cm 3 ) 1.08
Viscosity (mPas -25℃) 25000±2000
Tensile-strength(kgf /cm2 ) ≥49
Min Order200 kilogram
Application of liquid silicon of girls mold for sex
This product can be used in not only the field of common RTV-2 moldmaking silicone. As the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicone’s, it has no problem of deep vulcanize or reverse reaction, ect problem.
Therefore, our addition cure silicone is particularly applicable for large stones, plaster and cement product replication. It features with lower viscosity, high strength , good fluidity, can also be very suitable for precision complex pattern of the original copy.
Main features of liquid silicon of girls mold for sex
• Cold vulcanize with the appropriate catalyst
• Can be applied by direct pouring or by spreading
• Easy mould building, no need of particular equipments
• High elasticity, easy demoulding also for objects with undercuts
• Extreme faithfulness in the reproduction of details from any original model
• Odourless and no toxic
• Anti-adherent (no need of release agents for demoulding)
• poly-addition curing: low linear shrinkage and higher stability in time
Attention for liquid silicon of girls mold for sex
1. RTV2 Silicone Rubbers is white flowing liquid with general hardness of 22-40A° after curing.
2. If the mold makers want to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if the products with fine and precision patterns, it should be made of silicon with low hardness.
3. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; Contrarily, if molds requiring slower drying and demould, less curing agent is needed.
4. it doesn't better to add silicone oil into silicone rubber. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould. )
Data sheet of liquid silicon of girls mold for sex for your reference
Model | Color | Mixing ratio (%) | Hardness ( shore A ) | Tensile-strength (MPa) | Tear-strength (KN/m) | Viscosity (cps) | Shrinkage rate (%) | Elongation (%) |
E600# | Human collar | 1 : 1 | 0±2 | 20±5 | 5±2 | 2000±3000 | ≤0.1% | ≥350% |
E605# | Human collar | 1 : 1 | 5±2 | 22±5 | 5±2 | 2500±3000 | ≤0.1% | ≥450% |
E610# | Human collar | 1 : 1 | 10±2 | 30±5 | 7±2 | 2000±3000 | ≤0.1% | ≥400% |
E615# | Human collar | 1 : 1 | 15±2 | 30±5 | 10±2 | 3000±3000 | ≤0.1% | ≥650% |
E620# | Human collar | 1 : 1 | 20±2 | 50±5 | 16±2 | 4000±3000 | ≤0.1% | ≥600% |
E625# | Human collar | 1 : 1 | 25±2 | 50±5 | 15±2 | 6000±3000 | ≤0.1% | ≥500% |
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.