Liquid silicone rubber for injection mould making

                             Liquid silicone rubber for injection mould making  

1 Introduction of Liquid silicone rubber for injection mould making:

Liquid silicone rubber for injection moulds  is a two-component,translucent, addition cure liquid silicone rubberwith superior mechanicalproperties, particularly forbutton production of silicone rubber in high hardness and high strength

2 Features of Liquid silicone rubber for injection mould making:

Fast curing; high transparency;superior mechanicalproperties; No curing by-products; Easy

color; Safe non-toxic; Good ventilation;Heat resistance; Good weatherresistance.

3 How to use of Liquid silicone rubber for injection moulds

1.Mixed A with Baccording to mixing ratio of 1:1 through the static mixer,then injecting the mixed rubber into the mold through the injection machine, the rubber mustbe full filled (hand-mixing isfeasible, poured into the mold for molding)

2.Recommended molding conditions: 140°C/40-60s (thickness 2mm).

3.Test and determine the specific conditions of molding according to the thickness orsize of product

4.If the bonding between the special material and silicone rubber is needed(e.g. PET,PC, iron andsteel materials, etc.you can check the accessory products of the silicone adhesive about our company )

For getting further information about Liquid silicone rubber for injection moulds ,PLS contact with Miss Caroline:

TEL: +86-755-89948019

Mobile: +86-18938867567

Skype: cathy19900719

Email: hysf(at)szrl(dot)net

Website : www(dot)szrl(dot)net