Baby nipples injection moulding silicone rubber
- US $18.30
200 - 40,000 kilogram
- US $7.20
40,001 - 999,999 kilogram
group namesilicone rubber for textile coating& trademarks
-
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY-923 silicone rubber
payment methodT/T, L/C, Westem Union
-
update timeFri, 08 Nov 2013 21:12:30 GMT
Paramtents
color Translucent silicone rubber
Viscosity (Pa.S) 700
Density (g/cm3) 1.12
Hardness (A°) 50
Elongation at break (%) 450
Tear strength (KN/mm) 35
Curing condition 7 minutes under temperature of 150℃
HS Code 39100000
Delievery Time Within 3 days after bank slip received
Trade Terms FOB/CIF/CNF/DDU
Packging & Delivery
Min Order200 kilogram
Briefing
1. two part, 1:1 mixing
2. high viscosity for injection moulding
Detailed
Applications of Baby nipples injection moulding silicone rubber:
Injection moulding silicone rubber is widely used for manufacturing light weight but large scale products, such as cake molds, baby nipples, shelter, medical tubes, TV anode cap, auto machinery, electronics& medical care and injection products, such as copiers and all kinds of silicone gaskets, silicone roller rings, ect.
Performance of Baby nipples injection moulding silicone rubber:
Injection moulding silicone rubber for baby nipples making is a kind of addition-cure silicone rubber with high viscosity. high temperature cure silicone which is food grade safe with FDA certificate.
Advantage of injection molding silicone rubber is as follows:
Relative low viscosity , not only can be pumped to mix, but also can be formed the continuous automation during the process of measurement, mixing, injection molding. as well as formed products with different complex shapes.
Curing speed can be finished within 20~30mins and the molding cycle time is less than 1min, which is good for saving costs, efforts and be high efficiency.
with low molding pressure, accurate measurement, high precision molds, products can be perfectly formed with no flash or defects, which helps to save cost on raw materials and post-working process.
The performance of finished products can be compared favorably to HTV silicone rubber, while the labor costs can be saved by half.
The vulcanizing system of this product is the same as other addition-cured silicone rubber, but there won’t be peroxide decomposition products which generated by HTV silicone cured. It is with high transparency, high tear strength, good elasticity, good weather-ability, and with resistance of high temperature, aging, as well as excellent resistance to yellowing.
Packaging Details: 25kg/drum and 200kg/drum
Delivery Time: within 3 days after payment confirmed in our bank.
Payment Terms: L/C at sight, T/T, West Union
If you have any questions with Baby nipples injection moulding silicone rubber, feel free to contact Ms Aimee
MSN:aimeezhou055722(at)hotmail(dot)com
Skype: aimee055722
Email:hysz(at)szrl(dot)net
Tel: 0086-755-89948019
Mob: 086-18938867541
Trademanager:cn200039753
You need a product
You May Like
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents