100 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameLiquid silicone rubber for insoles
Min Order100 kilogram
brand nameHong Ye silicone rubber
modelHY-540 HY-570 HY-520
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:26:53 GMT
color white red,green or as your need
payment TT /LC /West union
certificates Rohs,Msds,Sgs,ISO9001:2000
features good tension,low viscosity, suitable hardness
mix 1:1 or 10:1
promotion over 500KG 2% discount
environmental protection yes
material liquid silicone with two part
usage Shoe Mold Silicone Rubber
samples available
Min Order100 kilogram
Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
2. Features of Shoe mold silicone rubber
a. shoe soles mold making
b. Two-component silicone rubber with tin-catalyst
c. Cured under room temperature
d. low shrinkage
e. excellent fexibility & easy demould
3. Shoe Mold Silicone Rubber hy218 Standard Datasheet:
Appearance: white
Viscosity(cp): ≤15000
Hardness(A): 18±2
Tensile strength(Mpa) ≥1.3
Tear-strength (kn/m) ≥5
Elongation break: (%)≥300
Curing agent mixed rate(%): 2-3
Operate time(min): 30
Curing time(hours): 2-4
Notes: Mixing ratio, pot life and Demould time in the above table is measured under the room temperature of 25.C, relative humidity of 65% to 70%. The data is only for referfence, mixing ratio should be 2% to 3% modified according to various temperatures. Different colors are available if requested.
4. Shoe Mold Silicone Rubber Using Instruction:
Shoe mold silicone rubber is used for pouring or brushing technique. The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent.
a. Take silicone rubber of 100g and add 2% curing agent for mixing evenly.
b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles.
c. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
For more information, please feel free to contact with Mr Wenson:
TEL: 0086-755-89948019
FAX: 0086-755-89948030
MOBILE: 0086-18938867531
skype: wensona
E-mail:hyb(at)szrl(dot)net
website:www(dot)szrl(dot)net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.