200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameLiquid silicone rubber for insoles
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE620# high heel silicon
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:35:21 GMT
Color Any color is available
Certificate ISO9001,SGS,REACH
application for silicone shoes pad, insoles
Elongation-break(%) 420 ± 50
MOQ 200kg
hardness (A°) 20±2
Features Liquid
Mixing Ratio 1:1
Hs code 39100000
Density ( g/cm 3 ) 24 ± 2
Min Order200 kilogram
Silicone high-heel shoe pad
Silicone high-heel shoe pad application
Silicone is good for high heel, silicone insoles, pads, keen pads etc.
Silicone high-heel shoe pad advantage
1. 100% medical grade silicone. Non-toxic.
2. Silicone distributes load more evenly. Shock absorption and pain relief.
3. Silicone grantees superior comfort and long lasting effectiveness.
4. With minimal toe depth in the front to make your feet comfortable.
5. Multi-purpose. Fit all kinds of shoes, including ladies shoes, running shoes and football boots.
6. Easy use. Can be changed from a shoe to another one easily.
7. Endurable and won't get deformed.
8. Easy cleaning. Does not absorb odors.
9. Both OEM and ODM service.
Silicone high-heel shoe pad data sheet
Model | HY-E20# | HY-E10# |
Appearance | Translucent/ Skin | Translucent/Skin |
Mixing Ratio | 1:1 | 1:1 |
Operating time (Mins 25°C) | 20-30 | 10-15 |
Curing time (Mins 25°C) | 60-90 | 60-90 |
Curing time (Mins 60°C) | 10-15 | 20 - 30 |
Hardness (A°) | 20±2 | 10±2 |
Density ( g/cm 3 ) | 1.08 | 1.08 |
Viscosity (CS) (Part A) | 6000-8000 | 30000 ± 5000 |
Viscosity (CS) (Part B) | 6000-8000 | 5000 ± 500 |
Viscosity (CS) (After mixed) | 6000 ± 1000 | 10000 ± 1000 |
Tensile-strength( kgf /cm2 ) | 75 ± 20 | 35 ± 20 |
Tear-strength (kgf /cm2 ) | 24 ± 2 | 10 ± 2 |
Elongation-break(%) | 420 ± 50 | 450 ± 50 |
Retractility(%) | ≤0.1 | ≤0.1 |
Instructions of silicone high-heel shoe pad
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame. After about 2~4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold.
Any more information silicone high-heel shoe pad, pls feel free to contact Ms. Bella:
Mobile: 0086-18938867572
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Website: www (dot) szrl (dot) net
Email: hysi(at)szrl(dot)net
Skeype: bellajiaqi
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.