200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameLiquid silicone rubber for insoles
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelE620
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:43:53 GMT
Color high translucent
high translucent 1:1
Certification SGS,MSDS,RoHS
Material 100% silicone
Classification Chemical Auxiliary Agent
Appearance Fluid
Appliacation silicone rubber for insole making
Sample Free
Hs code 39100000
Min Order200 kilogram
Description of Silicone Insole,Silicone Insoles for Shoes,Silicone Gel Insoles :
Silicone rubber for silicone insoles is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making masks, arms, legs, and other FDA application.
Application of Silicone Insole,Silicone Insoles for Shoes,Silicone Gel Insoles :
Silicone rubber for silicone insoles could be mainly used for making silicone insoles, concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of Silicone Insole,Silicone Insoles for Shoes,Silicone Gel Insoles :
Model | HY-E620# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 10-15 |
Curing time (Mins 25°C) | 30-50 |
Hardness (A°) | 18-20 |
Density ( g/cm 3 ) | 1.0 |
Viscosity (CS) | 7000±3000 |
Tensile-strength( kgf /cm2 ) | >13 |
Tear-strength (kgf /cm2 ) | > 3 |
Elongation-break(%) | >450 |
Retractility(%) | ≤0.1 |
Piture Show of Silicone rubber for silicone insoles:
Operation of Silicone Insole,Silicone Insoles for Shoes,Silicone Gel Insoles :
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Shelf life of Silicone rubber for silicone insoles:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
Certification of Silicone Insole,Silicone Insoles for Shoes,Silicone Gel Insoles :
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Need any help on silicone rubber, please feel free to contact Ms Crystal:
Tel:86-755-89948294
Mob:86-18938867509
E-mail: hyxd(at)szrl(dot)net
Skype:shisi1991
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
Package of Silicone rubber for silicone insoles:
About us:
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.