Liquid silicone rubber for pad printing,pad printing silicone rubber supplier

FOB Price

US $12.80
200 - 40,000 kilogram
US $9.88
40,001 - 999,999 kilogram

group namePad printing silicone rubber
Min Order200 kilogram
brand nameHong Ye silicone rubber
model901#,902#,912#,916#,918#,933#
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:54:01 GMT

contact supplier

Paramtents

Component A white
Component B red
Port shenzhen
Certification SGS,MSDS,RoHS
Material Material
Classification Chemical Auxiliary Agent
Appearance Fluid
Application making silicone pad
Color any

Packging & Delivery

Min Order200 kilogram

Briefing

Features of Liquid silicone rubber for pad printing:
1 good printing effects
2 fine quality
3 good resilience
4 no impu

Detailed

Characteristics and Application of Liquid silicone rubber for pad printing,pad printing silicone rubber:

1. Printing silicone rubber is a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the faster the curing.

2. Condensation type printing silicone rubber is used for surface printing of plastic and hardware products. It has good resistance to wearing, no distortion, no leakage and good ink transfer property.

Product Data of Liquid silicone rubber for pad printing,pad printing silicone rubber:

Item No	Appearance	Hardness (A°)	Viscosity (CS)	Tensile-strength( Mpa )	Tear-strength (kgf /cm2 )	Elongation-break(%)	Mixing Ratio of silicone and catalyst	Curing type	Working time(mins 25 0C)	Curing time(hours 25 0C)	shirinkage tare(%)
901#	Yellow,Green,Red,White	30±2	32000±2000	3.8	22±2	380	2%-3%	Condensation cure	30-40	3-4	0.3
902#	Yellow,Green,Red,White	30±2	35000±2000	4	24±2	430	2%-3%	Condensation cure	30-40	3-4	0.3
912#	Yellow,Green,Red,White	30±2	32000±2000	4	25±2	340	2%-3%	Condensation cure	30-40	3-4	0.3
916#	Yellow,Green,Red,White	14±2	36000±2000	3.5	25±2	570	2%-3%	Condensation cure	30-40	3-4	0.3
918#	Yellow,Green,Red,White	30±2	33000±2000	4.2	27±2	320	2%-3%	Condensation cure	30-40	3-4	0.3
933#	Red,White	32±2	18000±2000	3	8	350	09:01	Addition cure	10-20	2-4	0.1

Liquid silicone rubber for pad printing,pad printing silicone rubber supplier

How to Use Liquid silicone rubber for pad printing,pad printing silicone rubber:

1. Uniformly stir the printing silicone rubber for 5-10 minutes in the package barrel before use.

2. Clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent.

3. The normal proportion between the printing silicone and si-oil depends on the requirements of the customers. If pattern is too big, a soft silicon pad is needed and the amount of si-oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not. The appropriate hardness of general pad printing silicone rubber is 15A°~-25 A°; if too much silicone oil is added, the silicon pad is so soft that the printing times is limited, thereby bringing about abrasion intolerance, solvent intolerance and ageing.

Why Liquid silicone rubber for pad printing,pad printing silicone rubber is not clear?

A. If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will

be incomplete or not veryclear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing.

B. If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water.

Liquid silicone rubber for pad printing,pad printing silicone rubber supplier

Storage, Transportation and Notes of Liquid silicone rubber for pad printing,pad printing silicone rubber :

1.The products should be deposited in a clean, ventilating and shade place.

2. The products are non-dangerous goods.

3. Avoid skin and eyes contacting with the curing agent in processing.

4. Once exposed, immediately wash with certain detergent and water. If splash into eyes, should wash with flowing water at least 15 minutes and consult a doctor.

Need any help on silicone rubber, please feel free to contact Ms Kitty:

Tel:86-755-89948294

Mob:86-15989267535

E-mail: hysh(at)szrl(dot)net

Skype:kity-467707861

You can also send me e-mail by scanning 2 Dimensional Bar Code below:

Liquid silicone rubber for pad printing,pad printing silicone rubber supplier