200 - 40,000 kilogram
40,001 - 999,999 kilogram
group namesilicone rubber for textile coating& trademarks
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelSB4130,SB4140
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 21:58:59 GMT
color as request
sample available
Certifications ROHS.MSDS.SGS ISO9001:2000
hardness 10-40 shore A
mix ratio 1:1
appreance liquid
shelf 10 months
package 20 kg and 200kg per drum
application silicone rubber for trademark
MOQ 200 kgs
Min Order200 kilogram
silicone rubber for trademark Application:
trademark silicone rubber,silicone rubber for trademark is particularly suitable for the following elastomeric articles: baby nipples, medical tubs, cake molds, food molds, sealing elements, O-rings, stoppers, diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.
silicone rubber for trademark Description:
trademark silicone rubber,silicone rubber for trademark is a two-component liquid silicone rubber for injection molding processes. The silicone rubber shows a higher productivity, high transparence, less yellowing and low volatile contents. It would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
silicone rubber for trademark Picture show room:
silicone rubber for trademark Datasheet:
Model | SB4130 | SB4140 |
Appearance | Transparent | Tranparent |
Hardness(shore A) | 30±2 | 40±2 |
Mix ratio(A:B) | 01:01 | 01:01 |
Viscosity(mPa.s) | 65000±2000 | 67000±2000 |
Tensile strength(Mpa) | 4.2 | 4.1 |
Tear-strength(KN/m) | 17±2 | 17±2 |
Pot life/working time(25) | 6-24hrs | 6-24hrs |
curing time(100-120) | 3-10(minutes) | 3-10(minutes) |
silicone rubber for trademark Recommendations:
Ready-to-use mixtures (of the components A and B) are fed directly to the injection molding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
silicone rubber for trademark Package:
20kg/drum part A + 20kg/drum part B and 200kg/drum part A + 200kg/drum part B.
trademark silicone rubber,silicone rubber for trademark Certification:
Any information of silicone rubber for trademark, pls don't be hesitate to contact with Ms.Kaimi
Mob:0086-18938867528
Fax:0086-755-89948030
E-mail: hyju(at)szrl(dot)net
Skype:hyjiangying
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.