200 - 40,000 kilogram
40,001 - 999,999 kilogram
group namesilicone rubber for textile coating& trademarks
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelTB0330
payment methodT/T, L/C, Westem Union
update timeFri, 08 Nov 2013 22:14:39 GMT
Available color Transparent
Certifications RoHS.MSDS.SGS ISO9001:2000
Hardness 30±2
Curing time 20 - 30min
Mixing proportion of curing agent 1:1
Operating time 12-24 hours
Viscosity (MPas -25 0C) 60000~100000
Tensile-strength(kgf /cm2 ) 4.6
MOQ 200kg
Min Order200 kilogram
Description of Liquid Silicone Screen Ink for Coating on Textile
Liquid Silicone Screen Ink for Coating on Textile is a 2-part liquid silicone with high transparency, great tear-strength and strong bonding force. This product portfolio is complemented by water-based finished silicone rubber dispersions and a large number of special additives for customizing our standard grades. Textile coaters will thus find the perfect solution for every application at HY SILICONES.
Application of Liquid Silicone Screen Ink for Coating on Textile:
It is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc.
Specifications of Liquid Silicone Screen Ink for Coating on Textile:
-Low shrinkage(<0.1%)
-Good skid-proof effect and high adhesive strength
-Wearproof, wash-resistant, high temperature resistant
-Non-toxic and odorless, food grade silicone
-High transparency and good tear-strength.
Datasheet of Liquid Silicone Screen Ink for Coating on Textile:
Model | TB3115 | TB3120 |
Appearance | Transparent | Transparent |
Hardness(shore A) | 15±2 | 20±2 |
Mix ratio(A:B) | 1:1 | 1:1 |
Viscosity(mPa.s) | 60000~100000 | 60000~100000 |
Tensile strength(Mpa) | 4.6 | 4.8 |
Tear-strength(KN/m) | 20±2 | 22±2 |
Elongation(%) | 450 | 450 |
Pot life/working time(25°C) | 12-24 hours | 12-24 hours |
curing time(125°C) | 30~50 seconds | 30~50 seconds |
Operation introduction:
1,Mix Part A and Part B as ratio 1:1, you may add additive such as pigment as ratio 1~2% into part A.
2,It can be cured by heating with 100~150 degree, the curing time will be 5~10 minutes.
Operation process:
1, mesh printing
2, hot air gun printing
3. heat transfer
PACKAGE:
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
Any questions about Silicone Rubber, Leah is at your service.
TEL: 086-755-89212382
FAX: 086-755-89948030
MOBILE: 086-189 3886 7561
Website: www(dot)szrl(dot)net
E-MAIL: hyji(at)szrl(dot)net
Skype: leahchou1214
QQ: 189 3886 7561
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.