200 - 40,000 kilogram
40,001 - 999,999 kilogram
group nameRTV-2 silicone rubber for molds making
Min Order200 kilogram
brand nameHong Ye silicone rubber
modelHY 528#518# Silicone Rubber
payment methodT/T, L/C, Westem Union
update timeSat, 09 Nov 2013 12:07:45 GMT
color white
certificate RoHS, MSDS, SGS, ISO9001:2000
feature liquid
Sample available
Purity 100%
Type condensation silicone rubber
HS Code 39100000
Pot life/working life 30-40 minutes
Curing time 3-5 hours
Curing agent 4% for free charged
Min Order200 kilogram
RTV 2 silicone rubber for manual art mold making
using the RTV 2 silicone rubber we can make the manual art mold ,and there are some there application of the RTV 2 silicone rubber as follows :
RTV 2 silicone rubber for manual art mold making applications
Mold silicon rubber silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
RTV 2 silicone rubber for manual art mold making features description
features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers.
RTV 2 silicone rubber for manual art mold making operations
Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours.
(Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.)
Frequently asked questions for Silicon rubber for manual art mold making
What should we do when the air bubbles appeared in the process of mold making ?
To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre-crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.
Our factory:
For more information , pls feel free to contact Ms Shirley
office no. :0086-755-89948019
Mob:86-15220170905
Skype: patch8826
Email :hyh(at)szrl(dot)net
Welcome to our website www dot szrl dot net
网络文化经营许可证:浙ICP备14006100号-11 2007-2024 Tradevv.com. All rights reserved.